Laminating brushes

Standard paint brushes should not be used with Fibreglass as they are too soft and the glue holding the bristle may not be compatible with the styrene in the resin. Paint brushes will be harder to use, take longer and result in dry sections in the laminate, painted handles can also cause problems as the paint may come off and contaminate the resin.

These brushes are designed to give the best result a stronger finish and no dry patchy sections with full impregnation through the laminate with minimal effort, plus they are great value and will make your job a lot easier.

All our brushes have no paint or varnish on the handles to ensure no contamination from flaking and the glue holding the bristles in has been tested to ensure it does not dissolve and is safe to use with polyester and epoxy resin. This ensures minimum loss of bristles into the gel coat or the laminating resin. We also make sure the glue does not dissolve into the resin mix again avoiding any contamination between products.

Our brushes can be cleaned in Acetone without the glue dissolving, they work well when gel coating, top coating, and laminating. Because the glue is very resistant against the Styrene in Polyester Resin the bristles do not fall out when being used. Our brushes are very good value. even though they are around the same price as cheap paint brushes they are not the same as cheap brushes or expensive paint brushes, these are made for laminating and for use with products that other brushes are not compatible with. They are far better when laminating than cheap and expensive paint brushes. These brushes are made with wooden handles, solvent-resistant glue, and firm short bristles, these brushes do not have any paint or coating on the handles this is to make sure there is no chance that any coating, paint or varnish mixing with and contaminating the resin. They have short and firm bristles so they are perfect for laminating. Paint brushes do not push the resin through the matting and can lead t a weak laminate and a lot more work.

It is never a good idea to base your decisions on price alone and sometimes cheaper items cost you far more in time and quality, we never sell cheap products and we test every product we sell, these are really great value they are perfect for laminating and they are a great price. They are very economical, especially by the box or case rate

The short firm bristled brush helps push the resin through the matting resulting in a superior stronger laminate with far less effort. Plus great value, designed for Fibreglass work these are not the same as cheap or expensive paint brushes,

Great value brushes. these brushes are made with wooden handles These brushes do not have any paint or coating on the handles this is to make sure there is no chance that any coating could contaminate the resin, they have short and firm bristles so they are perfect for laminating. Paint brushes do not push the resin through the matting and can lead to a weak laminate and a lot more work.

Our brushes can be cleaned in Acetone without the glue dissolving, they work well when gel coating, top coating, and laminating. Because the glue is very resistant against the Styrene in Polyester Resin the bristles do not fall out when being used. Our brushes are very good value and even though they are around the same price as cheap paint brushes they are not the same as cheap brushes and they are far better when laminating than expensive paint brushes.